How to Check the Battery Level From the React Mobile Nexus Device

Support Team - Tier 1
Support Team - Tier 1
  • Updated

This article explains how to check the battery life of the React Mobile Nexus Device by performing a Health Check. Press and hold the side button, tap the main button once, then release both. The React Mobile logo flashes colors indicating battery level: green for over 40%, yellow for 20-40%, and red for under 20%. The battery lasts about 10 hours under normal use. Network coverage is shown by flashing green for Wi-Fi and blue for LTE, with flashes indicating signal strength.

In this article, you will learn how to check the battery life from the React Mobile Nexus Device.

 

You will need to perform a 'Health Check' on the React Mobile Nexus Device, which will allow you to confirm its current battery life.

 

Steps for Health Checking the React Mobile Nexus Device:

Press and hold the side (function) button and immediately tap the main (primary) button once, then quickly release both.

 

Once a health check is initiated, the backlit React Mobile logo is going to flash two series of colors to indicate different health metrics:

Phase 1 - Battery Level

  • Battery level is indicated by the LED light, which will flash once: 
    • GREEN - more than 40% charge.
    • YELLOW - more than 20% but less than 40% charge.
    • RED - less than 20% charge.
  • The battery lasts approximately 10 hours under normal usage. Repeatedly triggering alerts for test purposes and/or storing the devices in areas with low LTE/Wi-Fi coverage will drain the battery quicker.
     

Phase 2 - Network Coverage

  • FLASHING GREEN – The device is connected to Wi-Fi (1 to 4 flashes depending on Signal Strength).
  • FLASHING BLUE – The device is connected to LTE/Cellular (1 to 4 flashes depending on Signal Strength).

Was this article helpful?

Comments

0 comments

Article is closed for comments.