How to Enable or Disable Fall Detection - LoRa Firmware Version 1.0.7 and Higher

In this article we will learn how enable and disable fall detection on LoRa firmware version 1.0.7 and higher.

First, access the menu by tapping the home/screen button 5 times. Press the red side button to navigate down the menu options until the fall detection setting is highlighted.

Tap the home/screen button once to toggle fall detection off or on. "Falls: Alert" indicates fall detection is on, while "Falls: Ignore" indicates fall detection is off.

When fall detection is on, there will be an icon on the home screen resembling a person falling:

Fall detection will trigger when the device detects a fall (acceleration then a quick stop). The screen will ask the user if they are ok. The user can press any button 3 times to cancel the fall detection alert from sending. If no buttons are pressed after the 30 second timer counts down, an alert will initiate from the device.

Refer to the Understanding the Fall Detection Feature on the LoRa Device article for further assistance.

For a Spanish version of the above article, navigate to How to Enable or Disable Fall Detection - LoRa Firmware Version 1.0.7 and Higher (Spanish).