For networks using VLAN:
Our gateways are not configured to accept VLAN Trunk ports, so please configure our port for the VLAN you have assigned to us.
Our gateways also rely on strict time synchronization and must therefore have access to UDP port 123 traffic to the various servers pointed at by the DNS name 'pool.ntp.org'.
Do you prefer to assign static IP's for the final configuration? Or is it preferred to run with DHCP?
We only support DHCP, but you are welcome to statically assign.
Will you need remote access? If yes, how would it be setup?
We will not need remote access.
What are the Gateway MTCAP3 Firewall Requirements?
Port 443 (HTTPS) > TCP [Web administration]
Port 80 (HTTP) > TCP [Redirects to Port 443]
time.nist.gov Port 123 (NTP) > UDP [SNTP not enabled by default]
Port 22 (SSH) > TCP [SSH not enabled by default, and may not be needed]
Port 1883 (MQTT) > TCP [MQTT not enabled by default, Port is configurable]
Ports 5798/5799 > TCP [DeviceHQ device Mgmt not enabled by default] ds.devicehq.com
A proprietary protocol is used and DeviceHQ is hosted on AWS with load balancing.
Comments
0 comments
Article is closed for comments.